Rev: 12.02.20 Page 2 CCD-0003430
TABLE OF CONTENTS
Introduction 2
Safety 3
Operation 4
Unhitching From Tow Vehicle 4
Hitching to Tow Vehicle 5
Power Swap Auxiliary Cord - Optional 5
Manual Operation 6
Troubleshooting 7
Fuse 7
Clutch 7
Introduction
The Power Stance™ tongue jack is used with travel trailer A-frame applications. The textured casing helps
protect from chips and cracks. Three LED lights provide excellent illumination while reducing power
consumption. Helical cut gears reduce noise and improve operating efficiency. Enhanced rocker switch
improves its durability. The Power Stance tongue jack is protected by an in-line fuse and has an18” stroke
with a 3,500-lb capacity. A chain holder under the jack head provides a place to store chains when they are
not attached to the tow vehicle.
NOTE: The Power Stance tongue jack is designed for vertical movement of the trailer only.
NOTE: Images used in this document are for reference only when assembling, installing and/or operating
this product. Actual appearance of provided and/or purchased parts and assemblies may differ.
Additional information about this product can be obtained from lci1.com/support or by using the myLCI
app. Replacement kits can be ordered from https://store.lci1.com/ or by using the myLCI app.
The myLCI app is free on iTunes® for iPhone® and iPad® and also on Google Play™ for Android™ users.
iTunes®, iPhone®, and iPad® are registered trademarks of Apple Inc.
Google Play™ and Android™ are trademarks of Google Inc.
For information on the assembly or individual components of this product, please visit:
https://support.lci1.com/leveling-and-stabilization-support-tongue-jacks .