Lippert Components Power Stance User Manual

Rev: 12.02.20 Page 6 CCD-0003430
Manual Operation
NOTE: In the event of loss of power, the Power Stance tongue jack can be operated manually.
1. Manually unhitching from tow vehicle:
A. Chock the tires of the trailer.
B. Be sure the footpad of the Power Stance tongue jack is pinned securely in place with the clevis pin
and hairpin cotter pin (Fig. 5B).
C. Make sure the ground surface under the power tongue jack is firm and level.
Fig. 5
A
B
D. Open the rubber plug (Fig. 6A) on top of the Power Stance tongue jack's gearbox to expose the
manual drive shaft.
Fig. 6
A
E. Insert the socket end of the manual crank handle (Fig. 7A) into the manual drive shaft.
Fig. 7
A

Lippert Components Power Stance Specifications

General

Brand	Lippert Components
Model	Power Stance
Category	Jacks
Language	English