tv
3
lci1.com 574-537-8900 Rev: 02.10.20
CCD-0002548
SolidStep
®
3.0
Adjustable Latch
Installation and Owner’s Manual
(For Aftermarket Applications)
Resources Required
• 1 to 2 People, depending on task
• Cordless or Electric Drill or Screw Gun
• Appropriate Drive Bit
• Drill Bit ⁄" (for #10 wood screws)
• Drill Bit ⁄” (for #10 bolts)
• Tape Measure
THE “CAUTION” SYMBOL ABOVE IS A SIGN THAT
A SAFETY RISK IS INVOLVED AND MAY CAUSE
PERSONAL INJURY AND/OR PRODUCT OR PROPERTY
DAMAGE IF NOT SAFELY ADHERED TO AND WITHIN
THE PARAMETERS SET FORTH IN THIS MANUAL
Parts List
LetterLetter PNPN DescriptionDescription QtyQty
A Varies SolidStep Reference Only 1
B 702570 Bolt, #10 - 24 x 4” 10
C 723225 Screw, #10 - 13 x 1 1/4” Phillips 10
D 433704 Backer Plate, 21” x 2 5/8” 1
E 231161 Washer, #10 10
F 383612 Lock Washer, #10 x .34 10
G 383610 Nut, #10 - 24 10
H 433786 Hole Plug, 5/8” 2
NOTE: Part numbers are shown for identification purposes
only. Not all parts are available for individual sale. All parts
with a link to the Lippert Store can be purchased.
C
HE
F
G
NOTE: Triple SolidStep shown
for reference only.
A B
D
THE DEPLOYMENT AND RETRACTION OF THE STEP
ASSEMBLY CAN CAUSE INJURY IF PROPER
PRECAUTIONS ARE NOT TAKEN. THE STEP
ASSEMBLY WAS DESIGNED FOR AN OPERATIONAL
WEIGHT RATING OF 400 LBS.
MOVING PARTS CAN PINCH, CRUSH OR CUT. KEEP
CLEAR AND USE CAUTION.
To Next Page
Loading...
