Rev: 10.09.2017
Page 2
Electric Stabilizer Jack Owners Manual
System
TABLE OF CONTENTS
System 2
System Description 3
Operation 3
Extending Stabilizer Jack 3
Retracting Stabilizer Jack 3
6 Amp Circuit Breaker 3
System Maintenance 4
Mechanical Maintenance 4
Electrical Maintenance 4
Troubleshooting 5
Manual Override 5
Electric Stabilizer Jack Components 7
Electric Stabilizer Jack Components 8
Notes 9
Failure to act in accordance with the following may result in death or serious injury.
The Lippert Electric Stabilizer Jack is intended for the purpose of stabilizing the coach. The use of this system
for any reason other than which it is intended is prohibited by Lippert's Limited Warranty and may result in
serious personal injury or death.
The Lippert Electric Stabilizer Jack is designed as a stabilizing component system and should not be used
to provide service for any reason under the coach such as changing tires or repairing or replacing any
components beneath the coach. Do NOT use this stabilizer jack to attempt to level the coach.
Lippert Components Inc. recommends that a trained professional be employed to change the tires on the
coach. Any attempts to change tires or perform other service while coach is supported by the Lippert Electric
Stabilizer Jack could result in death, serious injury and/or damage to the coach.
NOTES:
• Be sure to park the coach on solid, level ground.
• Clear all stabilizer jack landing locations of debris and obstructions. Locations should also be free of
depressions.
• When parking the coach on extremely soft surfaces, utilize load distribution pads under each jack.
• People and pets should be clear of the coach while operating the Electric Stabilizer Jack.
• Never lift the coach completely off the ground. Lifting the coach so the wheels are not touching the
ground will create an unstable and unsafe condition.
To Next Page
Loading...
Need help?
General
