Lippert Components Tire Linc Quick Start Guide

Pairing Alert Indicator to Repeater
Fig.1
1. Pair the Alert Indicator
(Fig.1) to the Repeater by
pressing and releasing the
Alert Indicator button (Fig.1A).
A. The Indicator will power
up and its LED (Fig.1B) will
blink red once then blue
three times indicating the
Alert Indicator is NOT linked
to the repeater.
NOTE: After 10 seconds,
the Indicator will enter sleep
mode.
2. Link the Alert Indicator to
the Repeater by pressing and
holding the Pair Mode button
on the Repeater for at least
ve seconds until the Status
LED blinks rapidly.
3. Release the Repeater’s Pair
Mode button.
4. Press the Alert Indicator’s button
(Fig.1A) once to make sure the
indicator is awake.
5. Within 10 seconds of waking the
indicator, press and hold the Alert
Indicator button.
A
B
3

Lippert Components Tire Linc Specifications

General

Brand	Lippert Components
Model	Tire Linc
Category	Measuring Instruments
Language	English