Lippert Components Tire Linc Quick Start Guide

A. Continue to hold the Alert
Indicator button until its LED
and buzzer sounds.
I. One beep will sound off and
one green LED flash will be
emitted. Continue to hold
the button.
II. Two beeps will sound
off and the LED will blink
green twice. Continue to
hold the button.
III. After the Indicator beeps
three times, release the
button. The LED will blink
green three times.
B. The Alert Indicator’s LED
will briefly blink blue and emit
a happy tone, indicating it has
been linked to the Repeater.
6. The Alert Indicator is now
linked to the Repeater.
NOTE: The Repeater’s Status
LED will indicate green, yellow
or red to indicate certain
conditions (see Step 7). The
number of blinks of the LED,
regardless of color, also
indicates battery status (see
Step 8).
7. Wait for the Repeater’s
Status LED to turn o󰀨, then
press and release the Alert
Indicator’s button. The
indicator’s LED will ash as
follows:
• Green to indicate the Re-
peater is in range and mon-
itoring; tires within pressure
and temperature limits.
4

Lippert Components Tire Linc Specifications

General

Brand	Lippert Components
Model	Tire Linc
Category	Measuring Instruments
Language	English