Rev: 05.18.21 Page 14 CCD-0004329
The entire left side of the Settings Screen is dedicated to the caravan's water tanks (Fig. 15). The user may
assign unique names to each tank and turn them on and off.
Fig. 15
A caravan may have up to 4 water tanks. These tanks may be set up at the factory or by the user.
A user sets up their water tanks by turning them on. Once on, the tank can be renamed. The default name
for water tanks is “Tank” followed by a number.
Caravans have two types of tanks: Clean and Dirty. Clean tanks are intended for fresh, consumable water.
Dirty tanks are intended for waste water.
If the caravan is equipped with only one tank, it will be a Dirty tank. If a caravan is equipped with more than
one tank, the other tanks will be Clean. At any time, a user may select the type of tank.
If the user changes a Clean tank to a Dirty tank, the OCAU
System will lock the name as “Grey” for safety. If
there is more than one Dirty tank, the second will automatically be named Grey 2.
Users should take great care if they chose to convert a Dirty tank to Clean. This may require replacing the
entire tank and hose system to avoid contamination.
The user may also edit the warning scale of any tank. A user simply places their finger on a blue circle and
drags it to a different point on the spectrum line.
To Next Page
Loading...
