Lippert OneControl - Battery Settings and Power Saving; Time and Date Adjustment

Rev: 05.18.21 Page 15 CCD-0004329
Fig. 16
On the top right hand side of the Settings Screen, the user can calibrate the battery system (Fig. 16) by
selecting the chemistry type of the battery.
A user will need to enter the total Amp Hour capacity. This may vary by coach or if the user adds or changes
batteries. The user will need to determine total capacity themselves. A user may add capacity with the plus
("+") or minus ("-") buttons. It will increase or decrease in increments of 20 Amp Hours. The maximum is 400
Amp Hours.
Fig. 17
Power Saving Mode allows you to control when the OCAU System turns on and off (Fig. 17).
The user is also able to adjust the date and time as needed (Fig. 18).
Fig. 18