2
lippert.com 432-LIPPERT (432-547-7378) Rev: 09.26.22
True Course
™
Electronic
Sway Control System
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0004358
True Course Electronic Sway Control System KitTrue Course Electronic Sway Control System Kit
PN 2021010680PN 2021010680
LetterLetter PNPN DescriptionDescription QtyQty
A 2021010679
Control module with attached
tow vehicle 7-way cord
1
B 2021133267
Hex self-drilling steel screws,
1/4” - 14 x 1 1/4”
4
C N/A
Lippert True Course Bluetooth
Credential Card (Owner’s Tag)
1
Introduction
The True Course
™
Tow Control System module acts as
intermediary for the trailer brake system. When trailer sway
is detected, the module sends a brake signal without truck
brake command in order to mitigate vehicle sway.
NOTE: Images used in this document are for reference
only when assembling, installing and/or operating this
product. Actual appearance of provided and/or purchased
parts and assemblies may differ.
Additional information about this product can be obtained
from lci1.com/support or by downloading the free
LippertNOW app. The app is available on Apple App
Store
®
for iPhone
®
and iPad
®
and also on Google Play
™
for
Android
™
users.
Apple App Store
®
, iPhone
®
, and iPad
®
are registered
trademarks of Apple Inc. Google Play
™
and Android
™
are
trademarks of Google Inc.
Safety
Read and fully understand all instructions before installing
or operating this product.
Adhere to all safety labels.
Parts List
Resources Required
• Cordless or electric drill or
screwgun
• Marker
•
1/8” drill bit
• Appropriate drive bits
NOTE: Part numbers are shown for identification purposes
only. Not all parts are available for individual sale. All parts
with a link to the Lippert Store can be purchased.
MOVING PARTS CAN PINCH, CRUSH OR CUT. KEEP
CLEAR AT ALL TIMES.
A
B
C
DO NOT USE THE MODULE AS A STEP FOR THE
TRAILER. STEPPING ON THE MODULE MAY DAMAGE
THE SYSTEM.
To Next Page
Loading...
Need help?
General