Pulse Output Device
8
Get the latest PDF manual:
https://www.lcmeter.com/resources/technical/manuals
Mobile/online version of this manual:
https://www.lcmeter.com/manuals
Output Signal Resolutions
Approximate K-Factors and Volumetic Reference Data
When initially calibrating a specific meter model, the K-Factor (Pulses/Unit) values given below
are for reference only and are not to be used as a final K-Factor. NOTE: ll Liquid Controls
meter models listed below assume use of the 400ppr pulser with a 1:1 Packing Gland/Face
Gear ratio when calculating the Pulses/Unit. For 2:1 ratio, divide the Pulses/Unit by 2.
To Next Page
Loading...