EasyManua.ls Logo

LIVERYMAN Harmony Plus - Environmental and Battery Management; Environmental Disposal Guidelines; Battery Pack Charging and Usage

LIVERYMAN Harmony Plus
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
ENVIRONMENTAL DISPOSAL
It is the owners responsibility to dispose of the clippers in a reasonable manner after
their useful life. Do not dispose of in household waste. The clipper can be returned
to the place of purchase or Agrihealth for recycling, or taken to your local authority
waste disposal site.
INSTRUCTIONS FOR HARMONY PLUS BATTERY PACK CHARGING
The charging must be carried out indoors and in a dry place.
Only use the Liveryman mains adaptor that is provided.
Plug the adaptor into the mains socket. Do not switch the socket on.
Insert the connector lead from the adaptor into the battery pack socket marked IN.
Switch on mains socket.
The red LED indicates the battery is charging.
When the battery is fully charged the LED will change to blue.
Turn mains socket off and remove mains adaptor.
Remove connector from battery pack.
The battery pack is now ready for use.
Note: Charging should take approximately
- 4.5 hours for a clipping time of up to 4.5 hours.
- 2 hours for a clipping time of up to 2 hours.
- 1 hour for a clipping time of up to 1 hour.
During use, a flashing red LED and buzzer will give a 30 minutes warning before the
battery expirers. It is recommended to charge the battery for 3 hours before its first
use, or where the battery pack has not been used for several months.
CLIPPING WITH BATTERY PACK
Insert the battery pack connector into the socket at rear of Harmony Plus
clipper.
Clip the battery pack to a belt or trouser waist band and make sure that it is
secure.
The clipper is now ready for use.
Up to 4.5 hours clipping time depending on length of charge, thickness of coat
and sharpness of blades.

Related product manuals