Instruction manual
8
3. Move out cheese holder, fix the cheese on the cheese holder as described below:
To clamp the cheese by holder: put the cheese into holder, turn the side screw. Then you can turn
on the switch to operate.
4. You can move the cheese thanks to the slider cheese holder to adjust melting temperature.
5. After grill enough, move the cheese holder away from the grill so as not to burn you and scrape the
cheese on the plate with spatula.
6. After use, put the knob on off position and unplug the appliance.
CLEANING AND STORAGE
Caution: do not use wire brush or any abrasive items or liquids.
Always remove the plug from the socket before cleaning the appliance and ensure that it has cooled
down.
1. Cheese holder can be disassembled and clean with soapy water.
2. The shell part and the base can be clean with damp cloth, never immerse in water.
To Next Page
Loading...
