Gocator Line Profile Sensors: User Manual
Protocols • 463
Field Type Offset Description
length 32u 0 Reply size including this field, in bytes.
id 16u 4 Reply identifier (0x1022).
status 32s 6 Reply status.
spaceFree 64u 10 The free storage space in bytes.
Reply
Get Default Job
The Get Default Job command gets the name of the job the sensor loads when it powers up.
Field Type Offset Description
length 32u 0 Command size including this field, in bytes.
id 16u 4 Command identifier (0x4100).
Command
Field Type Offset Description
length 32u 0 Reply size including this field, in bytes.
id 16u 4 Reply identifier (0x4100).
status 32s 6
Reply status. For a list of status codes, see Commands on page
446.
name[64] char 10 The file name (null-terminated) of the job the sensor loads when
it powers up.
Reply
Set Default Job
The Set Default Job command sets the job the sensor loads when it powers up.
Field Type Offset Description
length 32u 0 Command size including this field, in bytes.
id 16u 4 Command identifier (0x4101).
fileName[64] char 6 File name (null-terminated) of the job the sensor loads when it
powers up.
Command
Field Type Offset Description
length 32u 0 Reply size including this field, in bytes.
id 16u 4 Reply identifier (0x4101).
status 32s 6
Reply status. For a list of status codes, see Commands on page
446.
Reply
Get Loaded Job
The Get Loaded Job command returns the name and modified status of the currently loaded file.
To Next Page
Loading...
Need help?
General
