3
INTRODUCTION
We thank you for purchasing a LMS Cooled Incubator, which we trust, will give you many years of
satisfactory service.
Manufactured in the United Kingdom using the finest materials and modern production techniques
your Cooled Incubator has already undergone extensive testing in our factory.
For correct operation it is essential that you observe the operating and maintenance instructions in this
manual.
EXPLANATION OF SYMBOLS USED
Electrical Earthing Point
Electrical Hazard Warning
(Mains Electrical Supply Within)
Exhibited where an internal power socket is fitted
General Safety Instructions
The physical and chemical properties of your load should be carefully considered with regard to the
effect this may have on the LMS Cooled Incubator. They are not internally sparkfree (available on
certain models) or explosion proof. Therefore solvents and/or chemicals which may form a flammable
mixture together with air are unsuitable for these cabinets; otherwise considerable damage can occur.
Transportation
Series 1: If these cabinets have to be carried it is recommended that at least 2 people assist and
that gloves should be used on all occasions. The cabinet should be kept upright.
Series 3 & 4: These cabinets are supplied on pallets and it is recommended that these are moved by
pallet truck or fork lift by competent persons, including someone to assist in
stabilizing the load. The cabinet should be kept upright.
Serial Number Plate
The Serial Number Plate contains the year of manufacture, in the following format: -
xxxx/99x = year of manufacture 1999
xxxx/01x = year of manufacture 2001
Aux. Circuit
To Next Page
Loading...
Need help?
General
