To Next Page
E
Edward WoodsAug 7, 2025
What to do if my LNS FOX WS 2 1020 has insufficient extraction?
- DDebra PerezAug 7, 2025
If your LNS Dust Collector has insufficient extraction, start by checking the pressure gauge and replace the main filter if it's necessary. Also, check the condition of the prefilter and clean or replace it if needed. Another cause might be that the extraction ducting is clogged, so remove any foreign objects from inside the duct. Make sure that the upper cover air exhaust is not obstructed, removing any object obstructing the purified air outlet. If the purifier is too small, contact our technical sales department. If the machine enclosure is airtight, slightly open the machine tool door, remove some covers or open ventilation holes in the appropriate places. Please contact our technical sales department for any doubts and for further information.
General
