LNS FOX WS 2 700 - User Manual

58 pages

Save Page as PDF

To Next Page

YOUR ”ONE-STOP-SHOP”

FOR MACHINE-TOOL PERIPHERALS

LNS America, Inc.

4621 East Tech Drive

Cincinnati, Ohio 45245 / USA

+1 513-528-5674

LNS@LNSamerica.com

www.LNSamerica.com

INSTRUCTION AND INSTALLATION MANUAL

FOX WS 2 170 / 330 / 700 / 1020 / 1250

F190054000 WS2.13.ANG

Main Page

Questions and Answers

S
smithamyAug 7, 2025
What to do if my LNS FOX WS 2 700 Dust Collector has insufficient extraction?
- B
  Brian AndersonAug 7, 2025
  If your LNS Dust Collector has insufficient extraction, start by checking the pressure gauge and replace the main filter if it's necessary. Also, check the condition of the prefilter and clean or replace it if needed. Another cause might be that the extraction ducting is clogged, so remove any foreign objects from inside the duct. Make sure that the upper cover air exhaust is not obstructed, removing any object obstructing the purified air outlet. If the purifier is too small, contact our technical sales department. If the machine enclosure is airtight, slightly open the machine tool door, remove some covers or open ventilation holes in the appropriate places. Please contact our technical sales department for any doubts and for further information.
S
Sean KaufmanAug 23, 2025
How to troubleshoot insufficient extraction in LNS FOX WS 2 700?
- K
  kristenknightAug 23, 2025
  To address insufficient extraction in your LNS Dust Collector, consider these potential causes: * Clogged filters: Check the pressure gauge and replace the main filter if necessary. Inspect and clean/replace the prefilter as needed. * Extraction ducting clogged: Remove any foreign objects from inside the extraction duct. * Upper cover air exhaust obstructed: Remove any obstructions from the purified air outlet. * Purifier too small: Contact our technical sales department. * Machine enclosure airtight: If opening the machine tool door slightly solves the problem, remove some covers or open ventilation holes in the appropriate places. Contact our technical sales department for further assistance.