LNS FOX WS 2 170 User Manual (English)

Charles FreemanAug 2, 2025

What to do if my LNS Dust Collector has insufficient extraction?

K
Kristen Ward MDAug 2, 2025
If your LNS Dust Collector has insufficient extraction, start by checking the pressure gauge and replace the main filter if it's necessary. Also, check the condition of the prefilter and clean or replace it if needed. Another cause might be that the extraction ducting is clogged, so remove any foreign objects from inside the duct. Make sure that the upper cover air exhaust is not obstructed, removing any object obstructing the purified air outlet. If the purifier is too small, contact our technical sales department. If the machine enclosure is airtight, slightly open the machine tool door, remove some covers or open ventilation holes in the appropriate places. Please contact our technical sales department for any doubts and for further information.

Brand	LNS
Model	FOX WS 2 170
Category	Dust Collector
Language	English

Brand

LNS

Model

FOX WS 2 170

General Information

Contents and Conventions

Manual details installation, use, and maintenance of WS 2 air purifiers.

Symbols and Terminology

Explains safety symbols, warnings for personal safety and equipment integrity.

Rights

Details copyright, liability, and trademark information for the manual.

Warranty

Outlines the supplier's guarantee period, terms, and conditions for products.

Safety Prescriptions

Lists essential safety rules and precautions for operating and maintaining the unit.

Safety Analysis for Correct Installation

Guidelines for assessing risks and selecting safety measures before machine installation.

Main Safety Regulations

Key regulations and procedures to follow for safe installation, use, and servicing.

Information Label Description and Placement

Describes various labels on the unit and their placement for identification.

Unit Range of Use

Specifies proper and improper uses, and operating conditions for the air purifiers.

Technical Data and Transport

Identification and Technical Specifications

Provides main identification data and technical specifications of the unit.

Handling and Transport

Details safe procedures for handling and transporting the unit, including packed material.

Storage

Guidelines for storing the units in suitable environmental conditions.

General Specifications

Lists general technical specifications like frequency, air flow, pressure, sound, and weight.

Curve Characteristics

Displays air flow performance curves at different frequencies (50Hz and 60Hz).

Electrical Specification

Details electrical specifications including motor type, poles, voltage, and power.

Dimensions

Provides detailed dimensions of the unit for installation planning.

General Description

Equipment Description and Components

Illustrates and lists the main components of the air purifier unit.

Component Description

Provides detailed descriptions of each component and their functions.

Installation and Use

Installation

Details the general installation requirements and minimum space needed for the unit.

Unit Installation Point

Shows different options for installing the unit: on machine tool, carriage, or floor rack.

Unit Installation

Explains necessary components and steps for unit installation, including anti-vibration mounts.

Extraction and Discharge Ducting

Guides on setting up fume extraction and discharge ducting for the purifier.

Draining

Instructions for installing drainage traps to manage re-condensed liquids.

Electrical Connections

Provides instructions and diagrams for making electrical connections to the unit.

Unit Use

Details how to start, stop, and interpret signalling devices for unit operation.

Maintenance

Information

Safety instructions and notes before performing any maintenance operations on the unit.

Maintenance Chart

A chart detailing cleaning, replacement, and inspection schedules for unit components.

Routine Maintenance

Step-by-step guide for performing routine maintenance on the pre-filter stage.

Main Filter Stage Maintenance

Instructions for maintaining and replacing the main filter stage based on pressure readings.

Extraordinary Maintenance

Procedures for performing extraordinary maintenance on the centrifugal stage.

Impeller Cleaning

Detailed steps for cleaning the impeller, including safety and torque specifications.

Seal Replacement

Instructions for replacing the main seal and impeller case seal.

Electric Motor Service

Procedures for disassembling and reassembling the electric motor unit.

Torque Settings

Table of specific torque settings for various screws and bolts during maintenance.

Periodic Checks

Lists periodic checks to be conducted every 5000 operating hours for safety and integrity.

Troubleshooting

Troubleshooting Procedures

Lists common problems, their possible causes, and solutions for the unit.

Disposal and Scrapping

Guidance on the proper disposal of consumables and scrapping of the machine.

Spare Parts

Spare Parts Information

Information about authorized spare parts and alterations to the machine.

Spare Filter Kits

Lists available spare filters (prefilter, main, absolute, carbon) with part codes.

Complete Spare Parts List

Comprehensive list of all spare parts with position, description, quantity, and codes.

LNS FOX WS 2 170 User Manual

Table of Contents

Questions and Answers:

LNS FOX WS 2 170 Specifications

Summary