EasyManua.ls Logo

Loc8tor Lite - Switching On; Off; Volume Control; Operating Tips

Loc8tor Lite
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SWITCHING ON / OFF
ON
Hold in the right hand side button (see Button Guide)
for 2 seconds. The Loc8tor will bleep and all the lights
ash.
Small status light will ash whilst on.
The Loc8tor will automatically power down after 45
seconds if left idle.
OFF
Hold in the right hand side button for 2 seconds. Loc8tor
will beep and turn off.
VOLUME
Press in the left hand side button to select from three
volume settings; off, low and high. An audio beep will
sound when pressed indicating the current volume
level.
TIPS
Write on the sticky label provided which button is
allocated to each Tag / item.
If a locate button is pressed with no Tag assigned to it
an error tone will sound and the status lights will blink
rapidly. To register a Tag to this button, complete the
steps ‘REGISTER A TAG’.
6