4
Plug the Secure Link Wi-Fi Hub into the 5V 1A USB AC adapter
and plug the AC adapter to your wall socket.
USA Outlet Shown
A RED LED indicator light will
flash slowly to indicate that
the Wi-Fi Hub is ready to
connect.
LED Indicator is
located next to the
Setup Button
Once you have confirmed that your Secure Link Wi-Fi Hub is
ready to connect to your lock, open the LOCKLY
®
app to
get started.
In case you have not downloaded our app,
you can scan the QR code to the left or visit
https://LOCKLY.com/app
Make sure you have already created an account and setup
your LOCKLY device to the LOCKLY app to continue.
Before you continue the Secure Link Wi-Fi Hub set up on your
app, proceed to the next page to learn more about using the
Secure Link Wi-Fi Hub and best practices for connectivity.
To Next Page
Loading...
