Lockly SECURE - Page 6

STEP 2: INSTALLING THE LOCKSET
2.1 Measure the distance between center of front door hole to the edge of your door
and select the correct lockset.
Select F1 if 2-3/8"(60mm) or F2 if 2-3/4"(70mm).
2-3/4"
(70mm)
2-3/8"
(60mm)
F1
F2
G
G
G
G
2.2 Install the lockset with the slanted side of the latch facing towards the closing direction.
Slanted side Facing Door Frame when closing
Slanted side Facing Door Frame when closing
OR
Example 1
Example 2
2.3 Secure lockset with provided screws, labelled G (Step 2.1) as shown.