To Next PageTo Next Page
Need help?Do you have a question about the LockState Wi-Fi and is the answer not in the manual?
Mount the exterior keypad assembly, ensuring the tailpiece engages the latch.
Secure the interior mounting plate to the door, passing the wire through.
Automatically set door handing for deadbolt locks via keypad commands.
Update the primary Programing Code for enhanced security.
Create and save new User Codes for unlocking the door.
Remove a specific User Code from the lock's memory.
Erase all previously saved User Codes from the lock.
Temporarily deactivate all User Codes for privacy without deletion.
Reactivate previously disabled User Codes for access.
Reconfigure the lock's Wi-Fi settings to connect to a new network.
Lock operates in reverse; cause is incomplete door-handing identification.
No response from keypad; check battery insertion or cable connection.
Lock not online; verify internet connection, router password, or router status.
Keypad operation requires key; check spindle installation position.
General| Connectivity | Wi-Fi |
|---|---|
| Compatibility | iOS, Android |
| Remote Access | Yes |
| Auto-Lock | Yes |
| Voice Control | Amazon Alexa, Google Assistant |
| Mobile App | Yes |
| Security | 128-bit AES Encryption |
