If this equipment is modified, appropriate inspection and
testing must be conducted to ensure continued safe use of
the equipment.
Set up and operate the device on a solid level surface.
The test subject should not wear loose or dangling clothing
while using the device.
Service of this device is restricted to factory trained
personnel only.
The operator should not touch accessible parts and the
patient simultaneously.
Read all warnings posted on the device.
Inspect the device for worn or loose components prior to
use. Tighten / replace any loose or worn components prior to
use.
Do not place any loose parts or objects on the device before
and during use.
To Next Page
Loading...
