Need help?Do you have a question about the Lode Corival V3 and is the answer not in the manual?
General| Brand | Lode |
|---|---|
| Model | Corival V3 |
| Category | Exercise Bike |
| Language | English |
Ergometer as a diagnostic tool for stress tests in medical environments.
Ergometer operation restricted to classified personnel; device sale restricted to authorized persons.
Annual calibration recommended; service by factory-trained personnel only.
Lists potential risks like wrong installation, use, dose, interpretation, breakdown, or failure.
Explains symbols found in the manual for clarity and recognition.
Identifies the elements of the standard Corival control panel.
Details the various connectors and ports on the back panel of the ergometer.
Basic steps for starting and using the ergometer in manual control mode.
How to control the Corival using an external analog signal.
Details digital control of the ergometer via the RS232 serial port.
Explains how to navigate the ergometer's main menu and access submenus.
Adjusts parameters displayed during exercise, including Power, RPM, Heart Rate, Torque, Timer, Distance.
Sets load regulation steepness and defines how parameters adjust during manual mode.
Device-specific adjustments like default startmenu, keyboard on/off, language, and device identification.
Diagnostic tools for servicing and calibration, requiring a safety code.
Settings for analog scaling, RS232 protocol selection, TC bytes.
Details electrical, mechanical, and performance specifications of the ergometer.
Lists fuse types and ratings for different voltage settings.
Describes RS232 connectors, external communication, and connecting multiple ergometers.
Details the use of the analog in/out connector for controlling instruments.
Instructions for cleaning the ergometer and safely replacing fuses.
Information on installing the unit and identifying control panel elements.
Detailed overview of the menu structure for the programmable control unit.
Shows the display for manual and analog modes on the programmable control panel.
Shows the display for the terminal menu on the programmable control panel.
Accessing and navigating system parameters via the programmable control panel.
Using the basic control panel for operation, service, or programming the display.
Allows programming new or editing existing exercise protocols with up to 15 steps.
Step-by-step guide to program a demonstration protocol with various stage types.
Selects and runs a desired protocol for an exercise test.
How to program or manually start blood pressure measurements during exercise.
Function to delete previously programmed exercise protocols.
Instructions for connecting, automatic recognition, and usage tips for the heart rate system.
Guide for medical personnel on operating the BP system and correct patient hook-up.
Instructions on palpating the brachial artery and applying the BP cuff correctly.
Guidance on placing the BP cuff on the upper arm, 2 cm above the elbow.
Lists error messages, display values, and possible causes for BP measurement failures.
General guidelines for cleaning and disinfecting the BP system components.
Detailed steps for cleaning the BP cuff, including air-hose and microphone removal.
Instructions for installing a BP option, usually done by service personnel.
Highlights user awareness of contraindications, warnings, cautions, and initial display for SpO2.
How to initiate the ergometer without load at a preset pedal speed, with or without P-display.
Lists manufacturers, external devices, and required RS232 protocols for connectivity.
Procedure to change the RS232 communication protocol for external connectivity.
To Next Page
