3. TIMER
3. DISTANCE
3. TARGET HR*
3. ENERGY*
2. SET P-SLOPE
2. SET MODE
3. HYPERBOLIC
3. HR CONTROLLED
3. LINEAR
3. FIXED TORQUE
3. ISOKINETIC (only available for Excalibur Sport 925900)
2. SETTINGS
3. DEFAULT STARTMENU
3. ECG START*
3. P IN/OUT ANALOG
3. CONTRAST
3. ECG TRIGGER
3. TC_BYTES
3. RS232 PROTOCOL
3. LANGUAGE
3. DEVICE NO
3. SEATING POSITION (only available for Excalibur Sport 925900)
1. PROTOCOL*
2. PROTOCOL EDIT *
2. PROTOCOL RUN *
3. ÅSTRAND PROTOCOL*
2. PROTOCOL DELETE *
Compared to the standard version the *menus are added.
B.3.2 Manual menu
Selecting the manual mode will show you (default) the following display at the programmable
control panel:
* BPM is displayed when this option is available, otherwise another MENU possibility is
active. With the
▼▲
keys you can increase or decrease the parameter of the selected mode.
In the middle the adjustable parameter is shown, f.i. the load P (to be set with SYSTEM
PARAMETERS> SET MODE)
B.3.3 Analog menu
Selecting the ANALOG menu will show the following screen at the programmable panel:
To Next Page
Loading...
