Loewe Concept 1700 - Teletext Paging Navigation; Topic and Page Selection; Accessing Teletext Summary

Note:
The teletext pages in the left-hand
column are active at all the programme
memory locations except the locations
which you have entered in columns 2, 3
and 4. The first line of the left-hand
column should always be programmed
with page 100 = Summary.
oun back to TV mode with the button
When you now select the 2nd
programme and switch to teletext with
button @), you will immediately see the
four coloured fields already mentioned
above. The yellow field shows the page
number of the last page stored in the
“Preferred page“ table. The blue field
shows the next page number after the
“starting page’.
Paging.
Paging foward.
You can page forwards from any page
with the green “VT: Forwards“ button
©, in our example, from page 100 to
page 101. If TOP is active, pressing this
button always pages forward to the next
available page. If the page has not yet
been found, you will see an arrow > in
front of the page number and the
second page number “runs“.
From page 100, the next pages
are searched and stored, with TOP
active also the next 5 topics and the
next 5 topic sections. In preferred page
mode, 10 pages are stored at a time.
For this reason, these pages appear
immediately when you page forward.
Paging back.
You can page back in exactly the same
way as paging forward, but using the
red “VT: Back“ button ©. You can page
back to the last 20 pages viewed.
To the next topic.
With TOP, you switch to_the next topic
with the yellow button @; the selected
topic section appears at the bottom of
the page in the user guide against a
yellow background, followed by the next
topic (separated by a slash); this_is
selected with the yellow button ©; e.g.
you may see here “TITLE /INDEX”.
To the next topic section.
With TOP, you switch to the next topic
section with the blue button @; the
next topic section appears at the bottom
of the page in the user guide against a
blue background; this is selected with
the blue button ©; e.g.
“CURRENT AFFAIRS“.
Selecting pages directly.
Teletext pages are numbered from 100
to 899. You can select any of these
pages directly by entering the page
number using the numeric keys on the
remote control unit; always enter the
page numbers as a 3-digit number; a
question mark appears for each number
not yet entered.
If the page does not exist in TOP,
the message <Page not found!> will
be displayed.
Calling up Summary“.
You can call up the “Summary“ page,
page 100, from any other teletext page
at any time by pressing the “Time
button @). This page is stored at all
times.
51