Loewe Concept 1700 - Antenna Socket Video Playback; Channel Setting for Video Playback; Fine-Tuning Video Signals; EURO-AV Socket Video Playback

Video playback via the antenna socket.
Programme memory location 00 is
specially
prepared
for
good
recep-tion
of
the
video
recorder
channel.
Most
video
recorders transmit on channel 37. This
channel is already stored under
programme number 00 on your set.
Please check this by calling up sub-
menu “Station search and storage”,
i.e, by pressing button €) twice. Is
channel 37 displayed?
"Station
search
and
storage
%
ac
eer
eae
insert a prerecorded cassette into
the video recorder and switch to
playback, or switch on the test station of
the video recorder.
If the station of the video recorder
is set to channel 37, you will now
receive picture and sound. If picture
and/or sound are not received properly,
however, the station of the video
-
recorder
may
be
set
to
another
channel.
The normal channel band is 30 to 42.
Use the fine tuner or the manual
_ éhannel selection with the remote
control
unit
of
the
TV
set
to
search
for
the
station.
Setting the channel.
Move
the
yellow
cursor
to
“Channel”.
Search
for
the
station
of
the
video
recorder
with
the
©
or
©
buttons.
When
you
have
found
the
station,
adjust
for
optimum
picture
and
sound
with
the
fine
tuner.
Adjusting the fine tuning.
Move the yellow cursor to “Fine“ and
adjust for optimum picture sharpness
with the @ or © buttons. To store the
setting, call up sub-menu “Storage
with
the
blue
cursor
button
@.
Press
button
®)
to
store
the
transmission
channel
of
the
video
recorder
and
the
fine
tuning
value.
Exit
from
the
menu
by
pressing the ©) button.
You can now play back from the
video
recorder
via
the
antenna
socket
on
programme
number
00;
if
the
video
recorder is not switched to playback,
you
will
see
the
programme
selected
on
the video recorder.
Video
playback
via
the
EURO-AV
socket.
Each
programme
number
can
be
used
for
the
playback
of
picture
and
sound.
A
number
of
programme-specific
options
can
be
stored,
e.g.:
@
Playback
via
EURO-AV
socket
1,
2
or
the
front
socket
“S-Term“.
@ Signal source with or without
switching voltage.
@ Type of signal, e.g. from the video
recorder (VTR), from theinteractive
videotex decoder (RGB), from an S-
VHS recorder (SVHS) or a video
signal (FBAS = Ext.).
Call up a programme memory
location number at which you wish to
store
the
AV
functions,
e.g.
20.
To
set
and
store
the
AV
functions,
first
call
up
the
“Main
menu"
with
the
button
. Is the blue cursor bar on
“Station search and storage’?
Press button €) again. Move the
blue cursor bar to “Add. func“ with
the blue arrow button @.
Station
AANA Return (TV) Main menu (MEN)
VV Modify (—+)
With the yellow buttons @, @,
select “AV input ..... You can then
select
the
audio/video
input
with
the
©
or © buttons.
Displays:
AV input ---
AV input EURO 1
No AV playback
possible,
AV playback via
EURO AV socket 1
AV input EURO 2 AV playback via
EURO AV socket 2
AV playback via the
front socket S-
Term;this socket is
provided specially for
SVHS camcorders or
Hi8 recorders.
AV input S-Term
55