Why is my Logia Weather Station not connecting to Wi-Fi?
If your Logia Weather Station is not connecting to Wi-Fi®, first check for the Wi-Fi® symbol on the display console. Also, make sure you are attempting to connect to the 2.4 GHz network and not the 5 GHz network, as the device may not support the latter.
What to do if rainfall totals are not correct on my Logia LOWSC510SWB?
To resolve incorrect rainfall totals for your Logia Weather Station, ensure that the rain collector is clean. This will allow the tipping bucket inside to operate smoothly and provide accurate measurements.
What to do if data is not reporting to Wunderground.com or Weathercloud.net from my Logia LOWSC510SWB Weather Station?
If your Logia Weather Station data isn't reporting to Wunderground.com or Weathercloud.net, verify that your Station ID and Station Key are correct. Also, ensure that the date, time parameters and time zone are properly set to ensure accurate data transmission.
Why temperature readings are too high during the day on my Logia LOWSC510SWB Weather Station?
If temperature readings are too high during the day on your Logia Weather Station, make sure the sensor is in an open area and is at least 6.6 ft. (2 m) off the ground. Also, ensure the sensor is not too close to heat-generating sources like buildings, pavement, walls, or air conditioning units.
What to do if indoor wireless sensor is not connecting to my Logia LOWSC510SWB Weather Station?
If the indoor wireless sensor is not connecting to your Logia Weather Station, ensure it is within the transmission range. Also, verify that the channel displayed matches the channel selection on the sensor. If problems persist, reset the sensor and sync it again to the display console.
Why is Wunderground rainfall total offset by 1 hour during daylight saving time on my Logia LOWSC510SWB?
To correct the Wunderground rainfall total offset by 1 hour during daylight saving time on your Logia Weather Station, ensure that the time zone of the device is set correctly on Wunderground. Also, verify that the time zone and DST settings on your console are correct. If your station is located outside of the US, try turning off the DST function on your display console.
Details the components and functions of the console's LCD screen.
Instructions for aligning and securing the rain collector funnel.
Steps for inserting AA batteries into the outdoor sensor.
Guidance on selecting a location and orienting the sensor on a pole.
Instructions for installing the backup button battery in the console.
Steps for connecting the power adapter and turning on the console.
Guidance on assembling and attaching the console's stand.
How to adjust the LCD display's viewing angle for better visibility.
Procedures for resetting the console to default or factory settings.
Steps to re-establish connection if sensors lose pairing.
How to re-pair sensors after changing their batteries.
Instructions for adding more wireless sensors to the console.
Steps to connect the console to your home Wi-Fi network.
Explanation of icons indicating Wi-Fi connection status.
Configuration for uploading data to online weather servers like Weather Underground.
Configuring the console to connect to a wireless router by SSID and security.
Entering Station ID and key for Weather Underground and Weathercloud.
Setting up the server URL and time zone for accurate time display.
Inputting latitude, longitude, and hemisphere for accurate weather data.
How the console syncs with internet time servers and displays the icon.
Accessing advanced settings like calibration and firmware updates via web.
Adjusting offset values for temperature readings of indoor and outdoor sensors.
Adjusting offset values for humidity readings of indoor and outdoor sensors.
Adjusting offset and gain values for barometric pressure readings.
Calibrating rain, wind speed, UV, and light measurements using gain or offset.
Steps to create an account and set up your weather station on Weather Underground.
Obtaining Weathercloud ID and Key for linking the device.
Manually setting the time and date on the console.
Explanation of moon phase calculation and icons for different hemispheres.
How the console automatically adjusts for Daylight Saving Time.
Instructions for setting the alarm time on the console.
Setting up a pre-alarm based on outdoor temperature thresholds.
Understanding temperature trend indicators and high/low alerts.
Managing and viewing data from multiple wireless sensors.
Understanding signal strength icons for wireless sensors.
Pictorial guide to indoor comfort levels based on temp and humidity.
Interpreting wind direction indicators and speed measurements.
Switching between average and gust wind speed displays.
Changing wind speed units (mph, m/s, km/h, knots).
Chart correlating wind speed with descriptive terms and land conditions.
Explanation of temperature-related weather indexes and their ranges.
Definition and determination of Dew Point.
How the barometer predicts future weather conditions.
Explanation of atmospheric pressure and its role in weather forecasting.
Switching between hPa, inHg, and mmHg for barometric pressure.
Changing rainfall units and selecting display modes (hourly, daily, etc.).
How to reset the accumulated rainfall data.
How the console records accumulated and daily MAX/MIN weather data.
How the console stores and displays weather data from the last 24 hours.
Steps to cycle through and set desired weather alert options.
Configuring high/low alerts for temperature, humidity, wind, and pressure.
How to silence an active weather alert alarm.
Instructions for replacing batteries when the low battery indicator appears.
Steps for cleaning the rain collector to ensure accurate readings.
Detailed specifications for the display console unit.
Technical details about the Wi-Fi communication standard and frequency.
Specifications for wireless sensor communication, including RF frequency and range.
Specifications for barometer units, measuring range, and accuracy.
Details on temperature and humidity units, accuracy, and resolution.
Specifications for wind speed units, range, accuracy, and display modes.
Specifications for rainfall units, accuracy, and weather index modes.
General| Brand | Logia |
|---|---|
| Model | LOWSC510SWB |
| Category | Weather Station |
| Language | English |
To Next Page
