Logidy EPSi - 4.3. Version C.00 Parameter List; 4.4. Version C.00 Algorithm

10
4.3. Version C.00 Parameter List
Meaning Values
1.Sd The Index of the SD
Card File used as an impulse
response
The values available
depend on the contents of
the SD Card (see file
naming section)
2.Lo Low frequency tone
control level
Unit: none.
Range: 0.0 to 10.0
3.Md Mid frequency tone
control level
Unit: none
Range: 0.0 to 10.0
4.Hi High frequency tone
control level
Unit: none
Range: 0.0 to 10.0
5.LF Low frequency tone
control cutoff
Unit: KHz
Range: 0.01 to 9.90
6.HF High frequency tone
control cutoff
Unit: KHz
Range: 0.01 to 9.90
4.4. Version C.00 Algorithm
4.4.1. Quality
The algorithm in Version C is optimized for zero latency processing. The actual
latency measured from analog input to analog output is 1.04 ms, 80% of this is
due to the group delay of the anti aliasing filters of the A/D and D/A converters. A
maximum convolution window in stereo of 1.5 sec (65536 samples) can be
achieved.