EasyManuals Logo

Logik L32SBIN16 User Manual

Logik L32SBIN16
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
4
Read all the instructions carefully before
using the unit and keep them for future
reference.
Retain the manual. If you pass the unit
onto a third party make sure to include this
manual.
Check that the voltage marked on the
rating label matches your mains voltage.
Damage
Please inspect the unit for damage after
unpacking.
Do not continue to operate the unit if you
are in any doubt about it working normally,
or if it is damaged in any way - switch o,
withdraw the mains plug and consult your
dealer.
Location of Unit
The unit must be placed on a at stable
surface and should not be subjected to
vibrations.
Do not place the unit on sloped or unstable
surfaces as the unit may fall o or tip over.
The mains socket must be located near the
unit and should be easily accessible.
This unit is designed for indoor use only.
Temperature
Avoid extreme degrees of temperature,
either hot or cold. Place the unit well away
from heat sources such as radiators or gas/
electric res.
Avoid exposure to direct sunlight and other
sources of heat.
Naked Flames
Never place any type of candle or naked
ame on the top of or near the unit.
Moisture
To reduce the risk of re, electric shock or
product damage, do not expose this unit
to rain, moisture, dripping or splashing. No
objects lled with liquids, such as vases,
should be placed on the unit. Do not
operate the unit with wet hands, near water
or other liquid.
If you spill any liquid into the unit, it can
cause serious damage. Switch it o at the
mains immediately. Withdraw the mains
plug and consult your dealer.
Safety Warnings
Ventilation
To prevent the risk of electric shock or
re hazard due to overheating, ensure
that curtains and other materials do not
obstruct the ventilation vents.
A minimum distance of 5cm around the
unit should be maintained to allow for
sucient ventilation.
Do not install or place this unit in a
bookcase, built-in cabinet or in another
conned space. Ensure the unit is well
ventilated.
Safety
Always disconnect the unit from the mains
supply before connecting/ disconnecting
other devices or moving the unit.
Unplug the unit from the mains socket
during a lightning storm.
Mains Cable
Make sure the unit or unit stand is not
resting on top of the mains cable, as the
weight of the unit may damage the mains
cable and create a safety hazard.
If the mains cable is damaged it must be
replaced by the manufacturer, its service
agent, or similarly qualied persons in order
to avoid a hazard.
The mains plug is used as
disconnect device, the disconnect
device shall remain readily
operable.
Interference
Do not place the unit on or near appliances
which may cause electromagnetic
interference. If you do, it may adversely
aect the working of the unit, and cause a
distorted sound.
Batteries
Batteries used in the unit are easily
swallowed by young children and this is
dangerous.
Keep loose batteries away from young
children and make sure that the battery
holder tray is secure in the unit. Seek
medical advice if you believe a cell has been
swallowed.
Please dispose of batteries correctly by
following the guidance in this manual.
L32SBIN16_IB_Final191216V8.indd 4 17/12/2019 11:08

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Logik L32SBIN16 and is the answer not in the manual?

Logik L32SBIN16 Specifications

General IconGeneral
BrandLogik
ModelL32SBIN16
CategorySubwoofer
LanguageEnglish