EasyManua.ls Logo

Logik LDR V3

Logik LDR V3
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
29
Important care and safety advice
This Digital TV Receiver has been manufactured to meet
international safety standards, but you must take care to operate it
safely.
It is important that you read these safety instructions. If you have
any doubts about the installation, operation or safety of this Digital TV
Receiver, please contact us.
Electrical warning:
Your Digital TV Receiver contains a high voltage which is suf cient
to cause a dangerous electric shock.
Never remove the cover. There are no user-serviceable parts
inside.
Only use the supplied power supply (or manufacturer’s
replacement) with your Digital TV Receiver.
Switch off the power supply from the mains wall socket before you
disconnect any equipment from the Digital TV Receiver.
Never push anything into holes, slots or other openings in the case
Positioning the Box:
The Digital TV Receiver and leads should be placed so that they
are not likely to be walked on or pinched by items placed upon or
against them.
The mains plug must be readily accessible and operable in order to
disconnect mains power whenever required.
Do not expose your Digital TV Receiver to direct sunlight or to
extreme temperatures (above 40°C or below 10°C), high moisture
levels or dust.
Condensation may accumulate on the Digital TV Receiver if it is
subjected to sudden changes in temperature. In this case, allow the
Digital TV Receiver to rest for one hour before use.
Allow at least 10cm on all sides of the Digital TV Receiver
(including the top, but excluding the base) for ventilation. Do
not place the Digital TV Receiver on top of or underneath other
equipment.