7
Connecting to a TV without a SCART socket
1
From your aerial.
2
To your TV (supplied RF lead).
3
To the mains power outlet (supplied power supply).
(Do not cut off the supplied power supply’s plug.)
You will now need to tune a spare channel on your TV. The
Digital TV Receiver automatically outputs a signal on RF
Channel 38.
If Channel 38 is already in use, or interference lines appear on the picture,
set the Digital TV Receiver’s “RF Output” option to a different RF Channel
(between channel 22 and channel 69) and retune your TV. Refer to page 24
for details on “RF Output”.
To Next Page
Loading...