Logik LDW60W11N

Procedure ->Test Program
No. Process
0 Initialization
1 Inlet Valve
2
Washing Pump
and Dispenser
3 Heating Element
4DrainPump
5 Pause
6 Inlet Valve
7 Washing Pump
8 Half load valve
9
Washing pump
and Half Load
Valve
10
Drain Pump and
Regeneration
Valve
11 finish
8:88
Run washing pump for 3 mins.
Pause washing pump and run half load valve for 5s.
Run washing pump and half load valve for 3 mins.
Procedure of Test Program (for models controlling water filling by flowmeter)
Display on
the screen
0A
09
08
07
06
05
Drain for 60s.
Pause for 15s.
Open inlet valve and feeds with 3.6L water(45cm models feeds with
3.0L). If model is equipped with fan, the fan would work in this step.
Description
Power on, stand by
Open inlet valve and feeds with 3.6L water(45cm models feeds with
3.0L).
F* Buzz one sound, stop, and stand by.
Dispenser will act once and washing pump will run for 60s in this step.
Run washing pump and heating element until the water temperature
reaches 60℃. Then the machine will pause.
Press Rightmost Program button to jump into the next step.
Open regenaeration valve and drain for 60s.
04
03
02
01
- 25 -