EasyManuals Logo

Logik LDWTT13E User Manual

Logik LDWTT13E
132 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
35
GB
Spray Arms
Particles of food can get stuck in the spray arm jets and bearings.
The spray arms should therefore be checked and cleaned
regularly.
Ensure the dishwasher is switched o. Use a pointed object, e.g. a
cocktail stick, to loosen food particles in the spray arms’ jets.
Frost Precaution
Avoid placing the dishwasher in a location where the temperature can get below 0˚C. If your appliance is left in an
unheated place over the winter, you are advised to:
1. Disconnect the unit from the water inlet.
2. Turn on the unit. Select any washing cycle and let it run for 1 minute only. This drains out all the excessive
water that remains in the unit.
3. Disconnect from the mains socket.
4. Empty the dishwasher.
5. Close the dishwasher’s door.
6. Disconnect the unit from the water drain. Use a suitable receptacle to catch any residual water in the pipes.
Should you encounter any diculties with the above steps, please ask a service agent for assistance.
Maintenance After a Prolonged Period of Non-Operation
If you are not going to use the unit for a prolonged period of time, you are advised to:
1. Disconnect the dishwasher from the mains socket.
2. Disconnect the dishwasher from the water inlet and drain. Use a suitable receptacle to catch any residual
water in the pipes.
3. Slightly open the door to prevent unpleasant smells building up in the compartment.
4. Ensure the washing compartment of the dishwasher is clean.
Moving the Dishwasher
If you have to move the unit, for instance due to moving house, you are advised to:
1. Disconnect the dishwasher from the mains socket.
2. Disconnect the dishwasher from the water inlet and drain. Use a suitable receptacle to catch any residual
water in the pipes.
3. Remove the dishwasher from the current location with the hoses discharged.
4. Pull the unit out together with the hoses.
Avoid over tilting the unit during transportation.
We recommend that 2 people handle the dishwasher during installation.
Do not attempt to remove the spray arms.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Logik LDWTT13E and is the answer not in the manual?

Logik LDWTT13E Specifications

General IconGeneral
BrandLogik
ModelLDWTT13E
CategoryDishwasher
LanguageEnglish

Related product manuals