14. Remove the freezer door bottom bushing
and bottom stopper (do not rotate)
from the right and then insert/fix them
(You may need to clear the screw holes
of excess foam insulation.) to the left
side. (The bushing key must be in the
correct position to allow it to be inserted
correctly.)
15. Remove the fridge door top bushing and
insert it into left hole. (The bushing key
must be in the correct position to allow it
to be inserted correctly.)
13. Swap the freezer door top bushing (The
bushing key must be in the correct
position to allow it to be inserted
correctly.) and top bushing cap. (You can
find the new bushing caps, if needed, in
the user instruction bag)
Unscrew
Screw
12. Screw the top hinge pin into the left side.
16. Unscrew the right door catcher and
remove. Refit the left door catcher (You
may need to clear the fixing holes of
excess foam insulation) and screw down.
(The left door catcher can be found in the
user instruction bag).
To Next Page
Loading...
Need help?
General
