EasyManuals Logo

Logik LI8W6D17 User Manual

Logik LI8W6D17
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
19
Adding Detergent and Softener
Add detergent into the appropriate dispenser.
Apply softener before you start washing.
Apply detergent and softener according to the washing
amount, the soiling level, the water hardness in your area
and the manufacturers instructions of these products.
For slightly dirty clothes, put a small amount of detergent into
compartment II of the detergent drawer.
For excessively dirty clothes, put ¼ of the detergent to be used into compartment I of the
detergent drawer and the remaining amount into compartment II.
Do not use the machine when the detergent drawer is removed. It may cause a water leak or
it may not work normally.
To prevent powder detergent from staying in the drawer, dry the inside of the drawer with a
cloth. Make sure the powder isn’t lumpy when you add it into the drawer.
If the rinse cycle isn’t removing all the detergent from your wash, use less detergent.
Softener and liquid detergent should not exceed the MAX level in the compartment.
Wash out unused softener with a splash of water or a damp cloth after the programme has
nished.
You can use liquid detergent in all programmes. For this, pour the required amount of liquid
detergent into compartment II of the detergent drawer.
Main Wash
Detergent
Prewash
Detergent
Softener
II
I
Main wash
detergent
Softener
Pre-wash
detergent
Dilute viscous fabric softener and fabric conditioner with water.
LI8W6D17_IB_RC_190830_grace.indd 19 30/8/2019 6:12 PM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Logik LI8W6D17 and is the answer not in the manual?

Logik LI8W6D17 Specifications

General IconGeneral
BrandLogik
ModelLI8W6D17
CategoryWasher/Dryer
LanguageEnglish

Related product manuals