What to do if water overflows from the bottom of Logik Washer/Dryer?
If you see water overflowing from the bottom of your Logik Washer/Dryer, check if the inlet pipe is firmly connected. If not, fix the inlet hose. Also, inspect the outlet hose for any leakage and replace the drain hose if necessary.
What to do if Logik Washer/Dryer has water leakage?
If you experience water leakage from your Logik Washer/Dryer, check and tighten the water hose connections, ensuring the connection between the inlet pipe or outlet hose and the tap or washing machine is secure. Also, inspect the drain pipe for any blockages and clean it. If the drain pipe is damaged, consult a qualified technician for repair.
What to do if Logik Washer/Dryer has draining malfunction?
If you encounter a draining malfunction with your Logik Washer/Dryer, rinse the filter of the draining pump and check the drainpipe for any blockages.
How to fix Logik L612WD12 that cannot start up?
If your Logik Washer/Dryer won't start, ensure the door is tightly closed, the power plug is correctly inserted, the water supply tap is open, the ON/OFF button is pressed, and the Start/Pause button is also pressed.
Why washing effects of my Logik L612WD12 Washer/Dryer are not good?
If the washing effects of your Logik Washer/Dryer are not good, it might be because the clothes are too dirty. Try selecting a more appropriate wash program. Also, check if you're using enough detergent. Add more detergent according to the instructions on the packaging.
Why indicator or display of Logik L612WD12 Washer/Dryer does not light?
If the indicator or display on your Logik Washer/Dryer doesn't light up, first check if the power is disconnected or the unit is turned off. Ensure the power is on and the power plug is properly connected. Also, check the mains plug and fuse, and make sure the washing machine is turned on.
How to fix unbalanced load protection function on Logik L612WD12?
If the Logik Washer/Dryer has an unbalanced load protection function, here are some steps you can take: 1. If washing a single item like a carpet or bed sheet, ensure it's symmetrically placed inside the drum. 2. Reduce the wet weight of laundry by manually wringing and placing them back symmetrically. 3. Reposition the laundry inside the machine for better balance on the drum's inner wall. 4. Add one or two more laundry items to reduce the unbalance. 5. Restart the spin cycle using the Spin program. If the issue continues, consult a qualified technician.
What to do if Logik Washer/Dryer has a lot of foam or motor failure?
If there is a lot of foam in the Logik washing machine or motor failure, select and run a program to fill and then drain the washing machine or ask a qualified technician to repair it.
What to do if Logik L612WD12 has water intake malfunction?
Check if the water pressure is too low or the water supply is cut off in your Logik Washer/Dryer.
General| Washing Capacity | 6 kg |
|---|---|
| Spin Speed | 1200 rpm |
| Colour | White |
| Manufacturer's guarantee | 1 year |
| Washing performance class | A |
| Spinning performance class | B |
| Number of programmes | 15 |
| Quick wash time | 15 minutes |
| Noise level (washing) | 58 dB |
| Weight | 65 kg |
Read and follow instructions carefully for installation.
Ensure a flat, stable surface away from freezing temperatures.
Instructions on how to remove transit bolts before operation.
How to level the machine and connect water supply and drain hoses.
Safety precautions for connecting the washing machine to the power supply.
Explains specific error codes and general troubleshooting steps.
General safety precautions for using the washing machine.
Safety guidelines related to the power supply and cable connections.
Specific warnings to prevent personal injury during use.
To Next Page
