EasyManuals Logo

Logik LI8W6D17 User Manual

Logik LI8W6D17
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
5
Before you start using the machine, turn the tap on to check that the
hose is properly connected. If it’s not, there may be a water leak.
Do not put too much laundry or detergent into the machine. It may
cause issues with the machine or laundry.
The appliance is not to be used if industrial chemicals have been used
for cleaning.
Lint must not be allowed to accumulate around the appliance.
Do not dry unwashed items in the appliance.
Fabric softeners, or similar products, should be used as specied by the
fabric softener instructions.
The appliance must not be installed behind a lockable door, a sliding
door or a door with a hinge on the opposite side to that of the
appliance, in such a way that a full opening of the appliance door is
restricted.
Be careful not to get your laundry caught in the door when you close it.
This could cause a water leak or damage your laundry.
This appliance is intended to be used in household and similar
applications such as:
- sta kitchen areas in shops, oces and other working environments;
- farm houses;
- by clients in hotels, motels and other residential type environments;
- bed and breakfast type environments.
This appliance is not intended to be used in areas for communal use
in blocks of ats or in launderettes. It is for indoor use only and not
intended to be built-in.
Adequate ventilation should be provided. The ventilation openings in
the base of the machine must not be obstructed by a carpet.
Your product is suitable to operate in ambient temperatures between
0°C and 40°C.
Ambient temperatures between 15°C and 25°C are ideal temperatures
for your product.
Power Source and Cable
Use an independent household dedicated mains socket, rated at
13 Amp 220V to 240V AC. If the machine is plugged in with other
appliances, it may overheat and cause a re.
Make sure the mains plug is pushed rmly into the socket. A loose
connection may overheat and cause electrical shock or a re.
Check the mains lead and mains plug for any damage. If the mains cable
LI8W6D17_IB_RC_190830_grace.indd 5 30/8/2019 6:12 PM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Logik LI8W6D17 and is the answer not in the manual?

Logik LI8W6D17 Specifications

General IconGeneral
BrandLogik
ModelLI8W6D17
CategoryWasher/Dryer
LanguageEnglish

Related product manuals