INSTALLATION
5
Location
When selecting a position for your dishwasher you should make sure the installation surface
is at and rm, and the room is well ventilated. Avoid locating your dishwasher near a heat
source, e.g. cooker, boiler or radiator. Extreme cold ambient temperatures may also cause
the appliance not to perform properly. This dishwasher is not designed for use in a garage or
outdoor installation.
Do not drape the dishwasher with any covering. When installing, ensure that free space is
left at the sides.
448
550
815
units in mm
1. Please ensure the dishwasher is installed
by a qualied technician. Refer to the tools
required.
The supplied door template also
contains installation steps which will
assist installation.
All parts removed must be saved to do the reinstallation in the future. Ensure the
dishwasher is unplugged and empty. We recommend that 2 people handle the
dishwasher during installation.
2. Ensure there is clearance each side of the
unit to allow slight sideways movement
for servicing when required. The height
of the unit is 815 mm. The gure outlines
the minimum dimensions required to
accommodate the dishwasher within tted
kitchen furniture units.
This product has been wet tested to ensure correct operation. As a result some
water may remain inside the unit. This is normal and safe. Remove any water
droplets from the exterior if necessary.
LID45W20_IB_Final200727.indd 5LID45W20_IB_Final200727.indd 5 27/7/2020 4:23 PM27/7/2020 4:23 PM
To Next Page
Loading...
