24
unscrew
1. Remove the 2 screws.
unscrew
unscrew
2. Carefully lift the top cover away from the
fridge.
3. Remove the three screws, then remove
the upper hinge that holds the door
in place. Lift the door and place it on
a padded surface to prevent it from
scratching.
4. Remove the screws and bottom hinge.
Then remove the levelling feet from both
side.
• Do not lay the unit flat as this may
damage the coolant system.
• During door reversal, when swapping
the position of the bottom hinge or
adjusting the levelling feet, tilt the
unit. Do not lay the unit flat.
LUF55W18E_IB_5L_RC_190415_grace.indb 24 15/4/2019 4:53 PM
To Next Page
Loading...
