26
8. Put the top cover back.
screw
9. Screw the 2 screws.
10. With the door closed, check that the
door is aligned horizontally and vertically
and that the seals are closed on all sides
before finally tightening the bottom
hinge. Re-adjust the levelling feet as
needed.
In some cases, the door seal may be crushed after
prolonged storing pressure, resulting to the door seal not
able to close properly when reversed.
Follow the steps below to solve the issue:
1. Peel off the door seal from the upper or lower corner
and warm it with a hairdryer; the warmth can allow
the door seal to return to its original form. Do not blow
directly on the unit as the warmth may damage other
parts of the unit.
2. Rotate the door seal upside down so that the side
originally with the hinge stay with the hinge.
3. Insert the door seal back into the door from the upper
or lower corner.
4. If the issue still occurs, contact your local service centre
for assistance.
180°
LUF55W18E_IB_5L_RC_190415_grace.indb 26 15/4/2019 4:53 PM
To Next Page
Loading...
