How to fix Logitec Harmony 650 Remote software unable to communicate?
If the Harmony Remote software is unable to communicate, try disabling any Internet security software you might have, including firewalls and anti-virus software.
What to do if Logitec Harmony 650 Remote doesn't turn on TV when starting Activity?
If your TV doesn't turn on when starting an Activity, but the Help button fixes it, the commands might be sent too quickly. Try increasing the Inter-Device Delay for your television using the Harmony Remote Software to space them out more.
Why Logitec Harmony 650 Remote Universal Remote doesn't go to the right input when starting Activities?
If your TV isn’t going to the right input when starting Activities, use the Harmony Remote Software to: 1. Check your Activity to ensure it’s set up to use the correct input for your TV. 2. Verify the inputs are in the correct order for the Harmony 650 to cycle through them properly. If you still have issues, try increasing the InterDevice and Input Delays for your TV.
What to do if Logitec Harmony 650 Remote sends the command twice?
If your remote sends a command twice when pressing buttons in an Activity, try lowering the repeats for the device receiving the command. You can do this using the troubleshoot option in the Harmony Remote Software.
How to find correct TV model number for Logitec Harmony 650 Remote Universal Remote?
If you receive a message informing you that you haven’t entered the correct model number when adding a new TV, look for the model number on the front, back, or bottom label of the device. Make sure you're not confusing it with the serial number or the model number of the device’s remote control.
General| LCD Size | 1.5" Diagonal |
|---|---|
| LCD Resolution | 128 x 128 |
| LCD Screen | 65, 000 Color |
| Backlit keypad | Yes |
| Backlight Color | White |
| Power Source | AA batteries |
| Brands Supported | 5, 000+ |
| Devices Supported | 200, 000+ |
| Maximum number of devices per account | 5 |
| Warranty | 1 Year (2 Years for Europe) |
| IR Learning | Yes (Up to 200 Khz) |
| Learning Capabilities | Any IR Device (Up to 200 Khz) |
| IR Transmitters | 2 |
| IR Transmission Range | Up to 50 ft |
| Memory Type | Flash |
| Memory Amount | 2MB |
| Supported Platforms | Windows XP/Vista/7 MAC OS X 10.3 + |
Weight and Dimensions| Weight | 6 oz (with battery installed) |
|---|---|
| Dimensions | 8.75” x 2.3” x 1.3” |
Explains the activity-based IR control and Smart State Technology of the Harmony 650 remote.
Defines core concepts: Activities, Devices, and how Inputs connect them for system setup.
Covers navigating the screen, selecting and switching between Activities on the remote.
Outlines the five-step guided setup using the Harmony Remote Software and device information gathering.
Provides checks for starting and switching Activities, and using Help if issues arise.
Instructions for adding, renaming, removing, or modifying Activities and devices in the setup.
Covers teaching IR commands from original remotes and following naming conventions.
Guides on updating firmware and transferring configurations to a new Harmony remote.
Addresses issues like TV not turning on or selecting the wrong input during activities.
Explains how to determine if inputs are controlled by one source button, multiple buttons, or menus.
Information on contacting support, FAQs, and using the Harmony Remote Software help.
To Next Page