Logitec Harmony 650 Remote User Manual

11
Guided online setup
The Harmony Remote Software leads you through a setup process and allows you to
change your setup later if you wish.
To begin, connect your remote to your computer using the USB cable provided and go
to www.logitech.com/myharmony. Follow the instructions to download the Harmony
Remote Software. After the software installs, start the Harmony Remote Software.
When you start the Harmony Remote Software, it checks for updates automatically and
downloads them if necessary.
After you install the Harmony Remote Software and gather your device information using
the Device Worksheet, the setup process guides you through ve steps in which you
answer a series of questions about how your entertainment system is set up.
Creating your user account1. : The setup walks you through creating a user account on
the Harmony Remote Software. You can also launch a tutorial about how to set up the
Harmony 650 from this step by clicking View Tutorial.
Connecting your Harmony 650 to your computer2. : The software ensures that your computer
and Harmony 650 are communicating with each other.
Setting up the devices you want to control:3. The software walks you through entering the
manufacturer and model numbers of your entertainment system that you collected using
the Device Worksheet.
Setting up Activities for the Harmony 6504. : The software asks you questions about how your
entertainment system is set up, and then saves the settings.
Updating the remote5. : The software transfers the information from your computer to the
remote.
For more information on installing the Harmony Remote Software, refer to the Quick-start
Guide that came with your Harmony remote.
Setting up your Harmony 650 for the rst time
Overview of the setup process
Gathering your device information
To simplify the setup process, we recommend you ll out the Device
Worksheet, so that all the device information is at hand when you need
it.
Locating manufacturer and model number on your devices
Manufacturer names and model numbers are typically found at the front
of a device, on a label on the back of the device, or in the User Manual
for that device.

Logitec Harmony 650 Remote Specifications

General

LCD Size	1.5" Diagonal
LCD Resolution	128 x 128
LCD Screen	65, 000 Color
Backlit keypad	Yes
Backlight Color	White
Power Source	AA batteries
Brands Supported	5, 000+
Devices Supported	200, 000+
Maximum number of devices per account	5
Warranty	1 Year (2 Years for Europe)
IR Learning	Yes (Up to 200 Khz)
Learning Capabilities	Any IR Device (Up to 200 Khz)
IR Transmitters	2
IR Transmission Range	Up to 50 ft
Memory Type	Flash
Memory Amount	2MB
Supported Platforms	Windows XP/Vista/7 MAC OS X 10.3 +

Weight and Dimensions

Weight	6 oz (with battery installed)
Dimensions	8.75” x 2.3” x 1.3”