Logitech A50 - Page 14

14 ENGLISH
When the headset is undocked, the power must be on for
the PLAYSYNC button to function. Single press the to cycle
between systems. The Base Station’s Input LED Indicator will
respond.
When all three systems are active, pressing the PLAYSYNC
button will cycle through each input sequentially, XBOX to
PlayStation to PC.
You can use the PLAYSYNC button when the headset is
docked to the Base Station, no matter what state the Power
Switch is toggled to.
1
2
3
4.2 CHANGING INPUTS
PLAYSYNC
button
If multiple systems are plugged in, A50 allows you to switch
between each system using the PLAYSYNC button, located on
the headset, under the Power Switch.