Logitech A50 - Page 15

15 ENGLISH
4.3 XBOX
To use A50 with your XBOX, please make sure it is rst congured. Your A50 also features Dolby Atmos withtheincluded
lifetime license.
Congure
Place A50 headset in the Base Station dock and powered on.
Press the PLAYSYNC button to set it in XBOX mode.
Undock the headset and leave it powered on, an on screen notication will indicate the headset hasbeenassigned.
This can take several seconds.
1
2
3
4
5
In XBOX Settings > Volume and audio output > Headset audio:
• For Headset format, select Stereo uncompressed or Dolby Atmos for Headphones.
Under Additional options, leave everything else unchecked, optionally you can enable Mute speaker audio
whenheadset attached, if preferred. This is recommended while on team chat, so that audio from your TV/Speaker
isnot picked up by your A50 microphone and disrupts your team.
Use
The A50 MixAmp technology integrates seamlessly with your XBOX. The A50 volume control and MixAmp Game/
Voicebalancer states are synced to the XBOX, they are viewable and also adjustable using yourcontroller via the guide
menu under the audio tab.
When the A50 Headset is docked/powered o, Audio from the XBOX is automatically routed to the TV/Speaker.
1
2