Logitech A50 - Page 16

16 ENGLISH
When the Headset is undocked/powered on, Audio from the XBOX will be re-routed to the headset. XBOX will notify on
screen when the headset s assigned.
• While the A50 Headset is undocked, you can power it o at any time to resume audio playback to your TV/Speakers.
• Note: the included Dolby Atmos license is hardware bound to your A50. Activating and using this feature requires
a valid USB connection to the console and power supplied to the A50 Base Station.
3
4.4 PlayStation
To use A50 with your PlayStation, please make sure it is rst congured.
Congure
Place A50 headset in the Base Station dock and powered on.
Use the PLAYSYNC button to set it in PS mode, an on screen notication will indicate the headset has been detected.
1
2
Optional: if desired, 3D Audio (Headphones) can be enabled and Audio Prole can be adjusted to your preference.
3
5
4
In Setting > Sound > Audio Output:
• For Output Device, choose USB Headset (A50).
• Navigate to the bottom and under Audio Form (Priority), select Linear PCM.
Then in Setting > Sound > Microphone:
• For Input Device, choose USB Headset (A50).