Logitech A50 - Page 17

17 ENGLISH
Use
To use the A50 headset, ensure the audio output is set to USB Headset (A50) and Mic is set to USB Headset (A50),
thiscan be accessed using either Settings or Control Center by pressing the PS button on your controller.
The A50 headset volume is separately managed from the PlayStation and designed not to sync. Carefully adjust both
PlayStation and A50 volume to ensure a comfortable level before use.
• Note: The Game/Voice balancer feature and controls will not be available when used with the PlayStation.
• Note: As designed, the PlayStation’s Switch Output Device Automatically feature works when the A50 is either
physically unplugged or is set to another operating mode (XBOX or PC), using the PLAYSYNC button. Docking
or Undocking the headset will not aect your console’s audio output and does not cause it to redirect. You can
manually choose the audio output by selecting the desired device, this can be done using Settings or Control
Center by pressing the PS button on your controller.
1
2
Place A50 headset in the Base Station dock and powered on.
Use the PLAYSYNC button to set in PS mode. an on screen notication will indicate the headset has been detected.
1
2
4.5 Switch
To use the A50 Headset and Base Station with your Nintendo Switch in docked mode, please follow these instructions.
Congure
The Switch console will automatically route audio to A50 when the Base Station is USB connected and is set
totheappropriate operating mode.
1
Use