Logitech A50 - Page 18

18 ENGLISH
The A50 headset volume is separately managed from the Switch and designed to not sync. Carefully adjust both Switch
and A50 volume to ensure a comfortable level before use.
• Note: The Game/Voice balancer feature and controls will not be available when used with the Switch.
• Note: Due to the way the Switch is designed and functions, audio to TV/Speaker will not be restored until the A50
iseither physically unplugged or is set to another operating mode (XBOX or PC), using the PLAYSYNC button.
Docking or Undocking the headset will not aect your console’s audio output and does not cause it to redirect.
2
4.6 PC
To use A50 with your PC, please make sure it is rst congured. A50 oers several USB Audio endpoints that can be used for
dierent functions or needs. Your A50 also features Dolby Atmos with the included lifetime license.
Congure
Place the A50 headset in the Base Station dock, powered on.
Press the PLAYSYNC button to set the product in PC mode.
1
2
3
Under Setting > Sound > Output:
• Make sure Output is set to A50 Game. Your system will now use this Audio Endpoint as the main output.
• Optional: you can also set the Spatial Audio format by clicking on A50 Game to navigate to its Properties,
thenunder Spatial Audio drop down, select either Microso Windows Sonic for Headphones or Dolby Atmos
forHeadphones if desired.
4
Under Setting > Sound > Input:
• Make sure Input is set to A50 Mic Out. Your system will now use the A50 X as the main microphone.