Logitech A50 - Page 19

19 ENGLISH
5
Optional: You’ll notice a secondary USB Audio Output Endpoint labeled A50 Voice. If desired, you can point your chat
application or your game’s chat output to this Audio Endpoint. Doing so will allow the MixAmp Game-Voice balancing
controls to function when accessed using the two paddle switches located on the right ear of the headset.
6
Optional: You notice a secondary USB Audio Input Endpoint labeled A50 Stream Out. This is used for the Stream Output
feature of A50. For details, please see the Stream Output section.
Use
Whenever the Base Station is connected to your PC and powered, the A50 will always output audio from your PC
ifsetas the primary audio device. Docking and Undocking the headset will not aect your system’s audio output
anddoes not cause it to redirect.
The A50 headset volume is separately managed from the PC and designed not to sync. Utilize both Windows
andA50volume adjustments to ensure a comfortable level before use.
• Note: the included Dolby Atmos license is hardware bound to your A50. Activating and using this feature requires
avalid USB connection to the console and power supplied to the A50 Base Station.
1
2
4.7 Bluetooth
®
The A50 headset needs to be connected to the Base Station for all audio playback, including Bluetooth.
TheBluetoothfeature will not be available if the headset is out of range of the Base Station.
Congure
When the headset in range of the Base Station and powered on.
Press and hold the Bluetooth button for 3 seconds.
1
2