Using your Bluetooth headset with the Logitech wireless hub
To voice chat using MSN
®
Messenger:
1 Connect your headset, and switch your computer’s sound to the headset by pressing
the headset button. See Connecting your Logitech headset
beginning on page 3 for details.
For other headsets, refer to your headset’s user guide for full details.
2 Launch MSN Messenger and Sign In.
3 Run the MSN
®
Messenger Audio Tuning Wizard to make sure your Logitech headset is
working optimally with MSN
®
Messenger. Start the wizard by selecting Audio Tuning
Wizard from the Tools menu, and follow the instructions on screen.
Please note the following when running the wizard:
• When asked to select the Microphone and Speakers you want to use,
make sure they are set to ‘Bluetooth Audio.’ If they are not, select this option
from the relevant drop-down lists.
• When testing the speakers, if you can’t hear the drum beat, this may be
because your headset has gone into sleep mode. Try pressing the button on
the side of your headset once.
4 Select the contact you want to chat with from the list available. The easiest way to do this is
to double-click their name in the Online list, and then click Start talking in the side bar of
the Conversation window.
You can also select a contact to chat to by:
• Right-clicking on their name in the Online list and selecting Start a Voice
Conversation.
• Highlighting their name in the Online list and selecting Start a Voice
Conversation from the Actions drop-down menu.
A message is sent to your contact inviting them to chat to you. Sit back and wait for their
reply! If you can’t hear your contact speak or if they can’t hear you, see Troubleshooting
,
page 10
, for suggestions of the actions you should take.
© 2005 Logitech, Inc. 7
To Next Page
Loading...
Need help?
General