EasyManua.ls Logo

Logitech G435 SE

Logitech G435 SE
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
G435 SE
SETUP GUIDE
|
GUIDE D’INSTALLATION
Question and Answer IconNeed help?

Do you have a question about the Logitech G435 SE and is the answer not in the manual?

Logitech G435 SE Specifications

General IconGeneral
TypeOver-ear
Driver Size40 mm
Frequency Response20 Hz - 20 kHz
Battery LifeUp to 18 hours
Weight165 g
MicrophoneYes
Wireless Range10 m
Sensitivity83.1 dB SPL/mW
CompatibilityPC, PlayStation, Mobile devices
ConnectivityBluetooth
Impedance45 Ohm

Summary

Cleaning the Logitech G435 SE

Before You Clean

Recommendations and precautions to take before cleaning the headset, avoiding washing machines or dryers.

Wiping and Cleaning Your G435 SE

Instructions for wiping and cleaning the headset using water, soap, and disinfecting wipes.

Connecting Your Headset Using LIGHTSPEED

Insert Receiver into USB Port

Insert the LIGHTSPEED receiver into the USB port of your PC, Mac, PlayStation 5 or 4.

Power On and Connect

Press the power button for 1.5 seconds; the LED turns cyan once connected.

Connecting Your G435 SE Using Bluetooth

Enter Bluetooth Pairing Mode

Press Power+Mute buttons for 3 seconds; LED flashes blue to enter pairing mode.

Pair with Device

Look for G435 SE in the Bluetooth list of your device and connect.

Switching Connection Modes

Initiate Mode Switch

Press the Mute button for 3 seconds or longer to initiate mode switching.

LIGHTSPEED Mode Confirmation

Switch to LIGHTSPEED; LED lights cyan for 5 seconds.

Bluetooth Mode Confirmation

Switch to Bluetooth; LED lights blue for 5 seconds.

Powering On and Off

Power ON Procedure

Press the Power button for 1.5 seconds when the headset is OFF to turn it on.

Power OFF Procedure

Press the Power button for 3 seconds when the headset is ON to turn it off.

Auto Shutoff Feature

The headset automatically shuts off after 30 minutes of inactivity.

Mute, Unmute, and Volume Control

MuteUnmute Microphone

Short press on the Mute button to toggle microphone mute on or off.

Set Max Volume (100 dB)

Press Mute + Volume UP for 3 secs; LED flashes orange 3 times for 100 dB.

Set Volume to 85 dB

Press Mute + Volume DOWN for 3 secs; LED turns solid orange for 5 seconds for 85 dB.

Checking Battery Level

Battery Level: 31%-100%

LED shows green for 5 seconds, indicating battery between 31% to 100%.

Battery Level: 15%-30%

LED shows red for 5 seconds, indicating battery between 15% to 30%.

Battery Level: 15%

LED flashes red for 5 seconds, indicating battery level is less than 15%.

Setting Sidetone

Enable Sidetone

Double press the Mute button; LED flashes orange twice to enable sidetone.

Disable Sidetone

Double press the Mute button; LED flashes orange once to disable sidetone.

Adjusting Sidetone

Sidetone Adjustment Methods

Use Mute + Volume UP or Mute + Volume DOWN to adjust sidetone levels.

Spare Parts and Recycling

Spare Parts List

List of available spare parts: Earpads, Wireless USB Receiver, Charging Cable.

Recycling Information

Guidelines for responsible disposal and recycling of electronic equipment and batteries.

Battery Removal

Battery Removal Steps

Illustrated steps for safely removing the battery from the headset.

Related product manuals